Viewing entries tagged
switch mod

1960's Silvertone 1488 Silhouette [7.4 lbs] :: bum switches & broken truss rod

Comment

1960's Silvertone 1488 Silhouette [7.4 lbs] :: bum switches & broken truss rod

1960's Silvertone 1488 Silhouette [7.4 lbs] :: bum switches & broken truss rod.

A bunch of work went into this guitar.  The removable truss rod was broken (and missing the adjustment nut), a small crack near the nut between the neck and the fingerboard, the original rocker switches were shot and the pickguard had shrunk and become distorted.

First the truss rod was repaired and the neck crack glued.  The switches were replaced with a Jaguar setup, and the pickguard mounting holes in the body were plugged and the guard re-mounted with new screws (I also added a few screws between the pickups and the neck to hold down the puffed up pickguard).  The tuner bushings were replaced as I could not source a replacement for one that was missing.  A neck shim along with a new bone nut finished off the setup.  These DeArmond Silverfoils sound incredible.

Comment

Jag switches in a Silvertone :: 1960's Silvertone 1488 Silhouette

Comment

Jag switches in a Silvertone :: 1960's Silvertone 1488 Silhouette

Jag switches in a Silvertone :: 1960's Silvertone 1488 Silhouette

The old rocker switches on this 60's Silvertone are sloppy and unpredictable, so they need to go.  They were held in place by massive amounts of electical tape and all the switches moved as one, making it difficult to quickly select specific pickups.  Here the switch is being replaced with a Fender Jaguar-style setup to greatly increase reliability.

This is the same Silvertone in for broken truss rod, links here and here.

Comment