Here's one of two Warmoth Strats a customer brought in for assembly.  Check out the unfinished roasted maple neck!  This one was partially assembled with the pickguard (wired up with Bill Lawrence L280 / L290 pickups) and locking tuners pre-installed.  I mounted the output jack, double checked the wiring and set up the guitar with D'Addario XL 10s.  I also had to swap out the saddle set screws for longer ones to account for a high neck angle.  The original set screws were only a thread or two away from maxing out.  I could have adjusted the neck angle but the shim would have been on the visible end of the neckpocket.