Chubbuck Guitars / Kevin Chubbuck, making & repairing guitars in an old building just north of Boston, Massachusetts.
Loose neck joint :: Lyon & Healy bowl back mandolin
The neck on this old Washburn mandolin was coming loose from the body so the two were separated and the fit will be tightened and re-glued. I'm guessing this is around 100 years old - the finish has an awesome patina.
2004 Gibson SJ-200 [4.7 lbs] :: fingerboard extension & center seam top cracks
This Gibson jumbo was dried out and needed a few top cracks repaired. Here's another photo from a couple years ago when it was in for a tailblock crack.
Dried out fingerboard brace re-glue :: 2007 Pavan TP-30
This nasty fingerboard extension crack took out the fingerboard brace in it's wake. Here the brace is being re-glued before fitting and gluing in two reinforcement cleats.
2014 Gibson Midtown Custom [8.7 lbs] :: setup
The Midtown is a chambered small body 335 with a flat top and back. This was in for a setup and strung with Ernie Ball Slinky Cobalt 10's.
Failing bridge :: Bedell TB-28-G
Here's a bridge that should be fairly easy to remove. Just need to break the remaining bond, clean, fit and re-glue. I was told that some superglue was used at one point so it should be interesting once the bridge is pulled.
![2004 Gibson SJ-200 [4.7 lbs] :: fingerboard extension & center seam top cracks](https://images.squarespace-cdn.com/content/v1/53dfcee2e4b0c0da377c65c7/1430978714800-YXGTPQBTSBR5JE3EJTYI/image-asset.jpeg)
![2014 Gibson Midtown Custom [8.7 lbs] :: setup](https://images.squarespace-cdn.com/content/v1/53dfcee2e4b0c0da377c65c7/1430978788836-Q6BP1TRX1Q1YK7M9TYSZ/image-asset.jpeg)
