Viewing entries tagged
resolder

1985 Philip Kubicki X Factor [8.6 lbs] :: setup

Comment

1985 Philip Kubicki X Factor [8.6 lbs] :: setup

A wild Kubicki bass in for a setup.  A few high frets up the neck needed to be tapped back down and the output jack rewired to improve the connections.

How about this bridge?  It's not the best for fine tuning the action as you can olnly rotate the saddles in 180° increments.  But the "water wheel" tuners are pretty unique.  I always have to think a little harder when the tuners aren't up on the headstock.

Oh and check out the built in drop D capo!  #slickness

Comment

2002 Gibson ES-333 [8.4 lbs] :: intermittent pickup & broken tuners

Comment

2002 Gibson ES-333 [8.4 lbs] :: intermittent pickup & broken tuners

2002 Gibson ES-333 [8.4 lbs] :: intermittent pickup & broken tuners

The neck pickup was cutting in and out on this hollowbody so that usually means you have fish the electronics out through the f-hole or pickup rout to clean / repair.  To my surprise I found an access cover in the back!  This is the first Gibson hollowbody with an access panel to come across my bench. As much as I don't like the idea of them on hollows, it makes resoldering this broken neck pickup lead and cleaning the pots much, much easier.  The bass-side tuners were also previously repaired by someone supergluing the covers.  This is always a temporary fix and the time had come to replace them.  Tuning is now much more stable with a new set of tuners.

Comment