Installing a middle pickup :: 1997 Fender Jaguar [8.9 lbs]

View fullsize

Installing a middle pickup :: 1997 Fender Jaguar [8.9 lbs]

A made in Japan Jag in for a middle pickup installation.  This guitar has been in the shop a few times before to remove a Buzz Stop, replace a Tuneomatic with a Mastery bridge and swapping out the pickups for Lollars.

Adding a middle pickup involved routing the pickguard, copper top shield and the body (prep photo here).  The low-cut / strangle switch was moved to a Bourns 1 meg push-pull pot that replaced the stock tone pot.  The original Lollar neck pickup was moved to the middle position and a new Curtis Novak went up front.  All pickups are selected via the three-switch plate.

This setup sounds incredible.  Wow.

View fullsize

Adding a 3rd pickup :: 1997 Fender Jaguar

View fullsize

Adding a 3rd pickup :: 1996 Fender Jaguar

Stripping down and prepping for a middle pickup installation on a 90's Japanese Fender Jaguar.  The new pickup is a Curtis Novak, the other two are Lollars.